BIGTREETECH MANTA M5P V1.0 - Interface and Connectivity; Motor Driver & Thermistor; Display & PC Connection; Supported Kinematics & Software

Shenzhen Big Tree Technology Co., Ltd.
BIGTREETECH
7 / 35
Motor Driver Port
Motor1, Motor2, Motor3 (Dual Motors Port), Motor4,
Motor5 5 Channels in Total
Thermistor
3 x 100K NTC, two of which are selectable for NTC
and PT1000
Display
SPI Touchscreen, LCD Display, HDMI Touchscreen,
DSI Touchscreen
PC Connection
Type-C
Interface
USB 2.0x2, LAN, DSI, CSI, SPI, HDMI0, HDMI1,
SOC-Card, MCU-Card
Supported Kinematics
Cartesian, Delta, Kossel, Ultimaker, CoreXY
Recommended
Slicer/Console
Cura, Simplify3D, Pronterface, Repetier-host,
Makerware