BIGTREETECH Manta M8P V2.0 User Manual
4
4-Pin Fan / Water Cooling Connection .....................................19
Using the Raspberry Pi CM4..................................................20
Download OS Image .....................................................20
Download and install Raspberry Pi Imager ................................20
Write OS ................................................................21
CM4 LITE Version (MicroSD Card) ....................................21
CM4 eMMC Version ..................................................24
System Settings (CM4) ...................................................25
USB 2.0 Hub Port ....................................................25
DSI1 Display ........................................................25
CSI1 Camera ........................................................25
Using the BIGTREETECH CB1 ................................................26
Download OS Image .....................................................26
Download and install Raspberry Pi Imager ................................26
Write OS ................................................................26
Set up WiFi .............................................................29
Configure the Motherboard...................................................30
Connect to the Device Using SSH Software ................................30
Compile MCU Firmware ..................................................32
Update Firmware ........................................................33
SD Card Update .....................................................33
DFU Update .........................................................33
Configure Klipper .......................................................35
V2.0 Upgrade Notes .........................................................36
Precautions .................................................................36
To Next Page
Loading...
Need help?
General
