BIGTREETECH MANTA M8P V2.0 User Manual

BIGTREETECH Manta M8P V2.0 User Manual
6
Specifications
Overall Dimensions
170 x 102.7mm
Installation Dimensions
Please refer to BIGTREETECH MANTA M8P V2.0-
SIZE-top.pdf
Microprocessor
ARM Cortex-M7 STM32H723ZET6 550MHz
Driver Input Voltage
24V, HV (24-60V) Selectable
Board Input Voltage
VIN=DC12V or DC24V
Heated Bed Input Voltage
BED IN=DC12V or DC24V
Logic Voltage
DC3.3V
Heating Interfaces
Heated Bed (HB), Heater Cartridge (HE0, HE1,
HE2, HE3)
Max Heated Bed Output
Current
10A, peak 10.5A
Max Heater Cartridge
Output Current
5.5A, peak 6A
Fan Interfaces
5x 2-pin PWM fans (FAN0, FAN1, FAN2, FAN3,
FAN4, Pi FAN), 2x 4-pin PWM fans (FAN5, FAN6),
1x always on fan, FAN0, FAN1, FAN2, FAN3,
FAN4, FAN5, FAN6 are available with 5/12/24V
selections.
Max Fan Output Current
1A, peak 1.1A
Total Current for Heater
Cartridge + Driver + Fans
Less than 12A
Expansion Interfaces
BLTouch (Servos, Probe), Servo, Filament Sensor,
5V Power Loss Detection, PS-ON, I2C, RGB, SPI,
TFT, EXP, CAN etc.
Motor Drivers
Supports TMC5160, TMC2209, TMC2225,
TMC2226, TMC2208, TMC2130, ST820, LV8729,
DRV8825, A4988 etc.
Driver Modes
SPI, UART, STEP/DIR
Motor Interfaces
Motor1, Motor2, Motor3 (dual), Motor4, Motor5,
Motor6, Motor7, Motor8 (8 total)
Temperature Sensor
Interfaces
5x 100K NTC, 4x support NTC and PT1000
Display Interfaces
SPI touchscreen, LCD display
PC Communication
Type-C for easy plug/unplug
Function Interfaces
USB 2.0*3, LAN, DSI, CSI, SPI, 40-pin GPIO,
HDMI0/HDMI1, SOC-Card, MCU-Card
Supported Machine Types
Cartesian, Delta, Kossel, Ultimaker, CoreXY
Recommended Software
Cura, Simplify3D, Pronterface, Repetier-host,
Makerware

BIGTREETECH MANTA M8P V2.0 Specifications

General

Brand	BIGTREETECH
Model	MANTA M8P V2.0
Category	Computer Hardware
Language	English