BIGTREETECH MANTA M8P V2.0 User Manual

BIGTREETECH Manta M8P V2.0 User Manual
29
Set up WiFi
Note: If you are using an Ethernet connection, please skip this step.
CB1 cannot directly use the Raspberry Pi Imager software to set up Wi-Fi name
and password like CM4. After the OS image is burned, there will be a FAT32
partition recognized by the computer on the MicroSD card. In this partition, there
is a configuration file named "system.cfg".
Edit in Notepad and set WIFI-SSID and PASSWORD.

BIGTREETECH MANTA M8P V2.0 Specifications

General

Brand	BIGTREETECH
Model	MANTA M8P V2.0
Category	Computer Hardware
Language	English