BIGTREETECH MANTA M8P V2.0 User Manual

BIGTREETECH Manta M8P V2.0 User Manual
35
Configure Klipper
1. Enter the Raspberry Pi's IP address in the computer's browser to access it.
Download the reference configuration named generic-bigtreetech-manta-
m8p-V2_0.cfg in the path shown in the image below. If you cannot find this
file, please update the Klipper firmware source code to the latest version or
download it from GitHub:
https://github.com/bigtreetech/Manta-M8P
2. Upload the mainboard configuration file to Configuration Files.
3. Add the mainboard configuration in the "printer.cfg" file:
[include generic-bigtreetech-manta-m8p-V2_0.cfg]
4. Modify the ID number in the configuration file to the actual ID of the
mainboard.
5. Follow the instructions in the link below to configure the specific functions of
the mainboard:
https://www.klipper3d.org/Overview.html

BIGTREETECH MANTA M8P V2.0 Specifications

General

Brand	BIGTREETECH
Model	MANTA M8P V2.0
Category	Computer Hardware
Language	English