BIGTREETECH Pi 2 User Manual
31
7. Precautions
1. About 10 seconds after powering on, the system enters the kernel phase.
At this time, the blue light stays on, and the green light flashes
continuously, indicating that the system is running normally.
2. Klipper OS:
Root administrator:
Login: root
Password: root
BIQU user:
Login: biqu
Password: biqu
Minimal OS:
Root administrator:
Login: root
Password: root
Minimal OS is a standard Armbian startup process, It only has the
administrator account `root`. After the first boot, the system will guide the
user to create their own ordinary account in the terminal.
3. The PCIe M.2 interface does not support hot-plugging; the solid-state drive
must be connected in advance for the device to be recognized.
4. When booting from eMMC, do not insert a MicroSD card. When booting
from a MicroSD card, it is necessary to erase the data in the eMMC.
To Next Page
Loading...
