BIGTREETECH Pi2 - 1 Product Profile; Feature Highlights; Specifications

BIGTREETECH Pi 2 User Manual
1. Product Profile
BIGTREETECH Pi 2 uses the higher performance quad-core A55-RK3566
chipset. It consists of rich interface functions, a built-in eMMC5.1, onboard
support for 2.4G/5G dual-mode, and WiFi transmission speeds of up to
433.3Mbps. It also supports the Bluetooth BT5.2 version. It has the same
mounting hole positions as the Raspberry Pi; therefore, installation and use
are convenient and quick.
1.1. Feature Highlights
 CPU: Rockchip RK3566, quad-core Cortex-A55 @1.8GHz
 GPU: Mali-G52 1-Core-2EE
 NPU: 0.8 TOPS NPU
 RAM: 2GB LPDDR4 (customizable: 1GB/2GB/4GB/8GB)
 Onboard eMMC 32GB (customizable: 8GB/32GB/64GB/128GB...)
 MIPI DSI display support (320P-1080P 60Hz)
 SPI Flash: Customizable W25Q256JWEIQ
 Dual-lane MIPI CSI-2 Camera Interface (320P-1080P 60Hz)
 3x USB 2.0 ports, 1x USB 3.0 port
 PCIe 2.1 1x1 Lane (Supports M.2 2242 4PIN+5PIN)
 MicroSD card slot (SDIO2.0)
 Networking: Gigabit Ethernet, 433Mbps WiFi, BT 5.2
 Audio: 3.5mm jack to support mic input
 Capacitive mic input
 40-pin GPIO header
 HDMI 2.0 OUT (480P-4K 60Hz)
 Onboard infrared receiver (38kHz)
 Same mounting hole positions as Raspberry Pi
 24V DC power input
1.2. Specifications
Dimensions: 93.8mm x 56mm
Installation Hole Spacing: 58.2mm x 49.4mm
USB-C Input: DC 5V±5%/2A
Output Voltage: 3.3V±2%/100mA
WiFi: 2.4G/5G, 802.11 ac/a/b/g/n/ wireless standards
Bluetooth: 5.2