BIGTREETECH Pi 2 User Manual
26
5.7. Using Bluetooth
1. To scan for Bluetooth devices, enter the following command, and a list of
Bluetooth devices will appear as shown below:
bluetoothctl --timeout 15 scan on
2. Find your Bluetooth device, for example, if your device name is "HONOR
xSport PRO", locate the corresponding Bluetooth MAC ID as shown below.
3. To connect to a Bluetooth device, enter the following command, connection
success is shown as below
bluetoothctl connect E0:9D:FA:50:CD:4F
To Next Page
Loading...
