Binder APT.line C 150 - Gas Bottle Connection Kit (Option)

C 150 (E2) 06/2011 page 24/78
Remove the rubber cover (b) by pulling it off.
Unit rear
Figure 15: Connection of the hose lead to the gas bottle
Now fit the hose nozzle (c) in the quick acting closure socket. To remove the connection, pull the hose
nozzle off the quick acting closure socket.
4.4.3 Gas bottle connection kit (option)
The following parts for connecting one bottle with the input connectors of the
incubator are included.
• Pressure reducer with manometers for bottle pressure and outlet
pressure
• 5 m pressure hose with pre-assembled hose nozzle
• 1 hose clamp
The pressure reducer is also available as an individual accessory.
Figure 16: Gas bottle connection kit
(
a
)
(
c
)
(
b
)