C 150 (E2) 06/2011 page 66/78
16.4 Sending the unit back to BINDER GmbH
If you return a BINDER product to us for repair or any other reason, we will only accept the product upon
presentation of an authorization number that has previously been issued to you. An authorization number
will be issued after receiving your complaint either in writing or by telephone prior to your sending the
BINDER product back to us. The authorization number will be issued following receipt of the information
below:
• BINDER product type and serial number
• Date of purchase
• Name and address of the dealer from which you bought the BINDER product
• Exact description of the defect or fault
• Complete address, contact person and availability of that person
• Exact location of the BINDER product in your facility
• A contamination clearance certificate (chap. 19) must be faxed in advance
The authorization number must be applied to the packaging in such a way that it can be easily recog-
nized or be recorded clearly in the delivery documents.
For security reasons we cannot accept a unit delivery if it does not carry an authorization num-
ber.
17. Disposal
17.1 Disposal of the transport packing
17.1.1 Outer unit packing
Packing element Material Disposal
Straps to fix packing on pallet
(no image)
Plastic Plastic recycling
Shipping box
Cardboard Paper recycling
Edge stuffing, top
PE foam Plastic recycling
Cardboard Paper recycling Removal
aid
Plastic Plastic recycling
PE foam Plastic recycling Pallet with foamed plastic
stuffing
Solid wood
(IPPC standard)
Wood recycling
To Next Page
Loading...
