C 150 (E2) 06/2011 page 73/78
18.7 Equipment and options C 150
To operate the CO
2
incubator, use only original BINDER accessories or accessories / compo-
nents from third-party suppliers authorized by BINDER. The user is responsible for any risk
arising from using unauthorized accessories.
Regular equipment
Microprocessor display controller with 2-channel technology for temperature and CO
2
CO
2
infra-red absorption measuring system
Fan-assisted air jacket system
Hot-air sterilization at 180 °C / 356°F
Gas mixing head
Weldless deep-drawn inner chamber made of stainless steel 1.4301/V2A, polished
Electronic error auto-diagnosis system with zero-voltage relay output
Temperature safety device class 3.1 acc. to DIN 12880
Lockable door
Tightly closing inner glass door
3 perforated shelves, stainless steel 1.4301/V2A
C 150-UL: Test mark CUL
Options / accessories
Perforated shelf, stainless steel
Door hinged left (option only available when ordering the unit, no retrofitting)
Silicone access ports, closable with 2 silicone plugs 30 mm / 1.18 in , rear, left or right side
Analog outputs 4-20mA for temperature and CO
2
, with DIN socket 6-poles, DIN plug included
Base on castors
Stacking adapter for direct, thermally decoupled stacking
Gas bottle connection kit
Pressure reducer
Cleaning kit (neutral cleaning agent, disinfection spray and lint-free disposable wipes)
Calibration certificate for temperature and CO
2
Qualification folder
To Next Page
Loading...
