Binder APT.line C 150 - Page 42

C 150 (E2) 06/2011 page 42/78
Password request
Password entry
(factory setting: “1”).
10 x
Depending on the selected set point type (chap. 9.2.1) a different display appears:
Entry of limit value or offset value
With set point type Limit:
Enter a limit value
Entry of limit value using the arrow keys.
or
With set point type Offset:
Enter an offset value
Entry of offset value using the arrow keys.
After 30 seconds the controller reverts to Normal Display automatically.