BD / BF / ED / FD / FED (E3.1) 12/2017 page 20/105
5. Start up
Insert the plug into a suitable socket (chap. 4.2).
BF, FD, FED size 720: Turn the chamber at the main power switch (chap. 2.3).
If there is no other indication on the controller than the standby symbol, press the standby button
until the display lights up.
The controller now shows normal display (chap. 6.2). If a timer function was active prior to turning off the
chamber, it is shown in the controller display.
Warming chambers may release odors in the first few days after commissioning. This is not a
quality defect. To reduce odors quickly we recommend heating up the chamber to its nominal
temperature for one day and in a well-ventilated location.
5.1 Behavior when opening the door
BD, ED: Depending on the temperature, heating performance may be adapted when opening the door.
BF, FD, FED: When opening the door, heating and fan turn off as long as the door remains open.
To Next Page
Loading...
