Binder CB-S 170 - Localization; Position of Safety Labels at the Chamber

CB-S / CB-S-UL (E7) 06/2020 page 9/119
1.5 Localization / position of safety labels at the chamber
The following labels are located on the chamber:
Pictograms (Warning signs)
Service label
Hot surface
Risk of injury (UL chambers only).
Observe the safety instructions in the
operating manual.
Figure 1: Position of labels
on the CO
2
incubator CB-S
Figure 2: Position of labels
on the CO
2
incubator CB-S-UL
Keep safety labels complete and legible.
Replace safety labels that are no longer legible. Contact BINDER Service for these replacements.