Need help?Do you have a question about the Binder COMBIMASS compact and is the answer not in the manual?
General| Media | Gases |
|---|---|
| Power supply | 24 V DC |
| Protection class | IP65 |
| Housing material | Aluminium |
| Output signal | 4-20 mA, pulse |
| Communication | Modbus RTU |
| Measuring Principle | Thermal mass flow measurement |
| Process temperature | -40°C to +150°C |
| Accuracy | ± (1.5% of reading + 0.5% of full scale) |
General safety precautions for handling COMBIMASS® series units, installation, operation, and maintenance.
Describes the features and operation of the COMBIMASS® compact gas mass flow meters.
Highlights critical advice and considerations for system operation and maintenance.
Steps for unpacking, checking goods, and preparing for the installation of the measuring system.
Guidance on physically installing the COMBIMASS sensor into the process piping.
Methods for positioning the sensor rod and calculating dimension B for installation.
Procedure to determine dimension B without using a feed unit.
Steps to calculate dimension B when using a feed unit with an external thread.
Steps to calculate dimension B when using a feed unit with an internal thread.
Instructions for correctly positioning the sensor rod within the pipe.
To Next Page