Binder COMBIMASS compact - Changing the Diameter; The Summation

COMBIMASS
®
compact
Doc. No.: 0905AE20500 46
Kapitel 3 Appendix
[ EXIT ]
Confirm with SET.
Display:
DISPLAY
By 1x ⇓ the function [ EXIT ] is selected.
Display:
[ EXIT ]
The device returns to the normal operation mode.
Display:
For example:
0.00
Changing the diameter:
Menu: DIMENSION
Value: Inner diameter of the pipe in mm
Enter the menu by 1x SET.
Display:
DIMENSION
Display the actual diameter by 1x SET.
Display:
For example:
125 [mm]
Change the diameter by pressing ⇑ and ⇓ to the desired value and confirm by 1x SET to be able to save
the new value.
Display:
Save NO
Switch to Save YES by pressing the ⇑-button.
Display:
Save YES
The summation:
Menu: SUMMATION
Purpose: Configuration of the embedded summation.
Display the menu by 1x SET.
Display:
DIMENSION
Select the sub menu SUMMATION by 1x ⇓.
Display:
SUMMATION
Confirm by 1x SET to enter the sub menu SUMMATION:
Display:
SUMM. CFG.
- Scroll through the sub menus by pressing ⇓ and ⇑.
- Enter a sub menu by pressing SET.