Why is my Binder KMF-720 chamber not heating up?
If your Binder Laboratory Equipment chamber isn’t heating up, it could be due to a defective Pt 100 sensor, in which case you should contact BINDER service. It could also be due to a defective heating element or a defective semiconductor relay.
How to fix a Binder KMF-720 Laboratory Equipment chamber that is heating permanently?
If the chamber of your Binder Laboratory Equipment is heating permanently and the set-point is not maintained, it could be due to a defective controller, in which case you should contact BINDER service. Alternatively, the controller might not be well adjusted, or the adjustment interval may have been exceeded. In this case, calibrate and adjust the controller.
Why am I getting wrong temperature alarms on my Binder KMF-720 Laboratory Equipment?
If you experience wrong temperature alarms or disturbance of temperature accuracy with your Binder Laboratory Equipment, it may be because the temperature unit has been changed to °F. Set the temperature unit back to °C.
Defines danger levels with signal words like DANGER, WARNING, CAUTION.
Explains the use of the safety alert symbol indicating a risk of injury.
Crucial safety instructions for unit installation and operation.
Defines proper usage of the chamber and lists restricted applications.
Provides a general overview of the constant climate chamber.
Provides guidelines for safe lifting and moving the unit.
Methods and requirements for supplying freshwater to the unit.
Instructions for connecting the unit to the power supply.
Explains the functions and buttons of the MB1 controller.
Describes the Idle, Manual, and Program operating modes.
How to enter temperature, humidity, and fan speed set points.
How to enter programs using the controller's menu system.
Steps for entering temperature and fan speed values in programs.
Steps for entering humidity values in programs.
Description of the internal Class 1 over-temperature protective device.
Description of the Class 3.1 safety controller for over-temperature protection.
Guide to checking and setting the safety controller's type and set-point.
Details the optional Class 3.3 safety device for over/under temperature protection.
Instructions for setting and checking the Class 3.1 safety device.
Instructions for setting and checking the Class 3.2 safety device.
Overview of notification and alarm messages and their indications.
Procedure for acknowledging and resetting notifications and alarms.
Explains how the humidifying and dehumidifying systems operate.
Guidelines for regular maintenance and service intervals.
Procedures for cleaning and decontaminating the unit.
Detailed steps and recommended agents for cleaning the unit.
Steps for decontaminating the chamber after hazardous substance contact.
Addresses issues with chamber heating and safety controller response.
Covers problems with cooling performance and humidity control.
Explains errors related to the MB1 controller display and functions.
Comprehensive technical specifications for various KMF models.
General| Internal Volume | 720 liters |
|---|---|
| Max. Load per Shelf | 30 kg |
| Permitted Total Load | 120 kg |
| Rated Voltage | 230 V |
| Power Supply | AC |
| Internal Dimensions | 1200 x 600 x 1000 mm |
| External Dimensions | 1265 x 1985 x 985 mm |
| Weight | 258 kg |
To Next Page
