Bio-Logic SP-240 User Manual

Manual for VMP300-based instruments
27
Fig. 27: USB device installation window. Step 2 to 4.
Click on Finish. The potentiostat can now be connected to the computer through the USB
connection. It is not necessary to restart the computer after this installation.
3.5.2 Windows Seven, Eight, 10 & Vista installation
With Windows seven, eight, 10 and Vista systems, the USB driver is automatically installed
when the instrument is detected. The following message is displayed at the end of the
installation:

Bio-Logic SP-240 Specifications

General

Brand	Bio-Logic
Model	SP-240
Category	Measuring Instruments
Language	English