Bio-Logic SP-240

To Next Page

To Previous Page

Manual for VMP300-based instruments

8) The downgrade

process starts

and

“Upgrading...”

appears on the

bottom of the

window (but the

firmware is really

downgraded).

Fig. 52: Flash loading.

Fig. 53: Upgrading message on the status bar.

9) Close the “firmware downgrading/upgrading” window and EC-Lab V10.23. The

downgrading procedure is now completed and you can connect the older version to the

instrument.

10) Open the older version of EC-Lab V10.12 and connect to the instrument.

Bio-Logic SP-240 - Page 48