Bio-Well Company
www.bio-well.com
There is one more parameter that Bio-Well Software is able to calculate for
intervals that are more than 360 GI long - Activity Level of Environment (ALE).
Remember that 360 GI can take minimum of 6 minutes and maximum 6 hours –
depending upon the interval you have set between GI. This is an experimental
parameter that is trying to analyze how auspicious is the space for a living being. This
parameter was developed for experiments with Sputnik sensor only. If at least one of
the intervals in your experiment is 360 GI long – then your report will have 5
th
page
with ALE parameter value.
Comparing Scans
Results of the Scans that you select in the Scans list are automatically downloaded
from the Bio-Well Server. Select multiple Scans at a time that you want to compare by
using “CTRL“ or “SHIFT” buttons on your keyboard – results of all the selected Scans
are going to be downloaded one-by-one. Once the download process is finished (you
can see it by the download completion percentage in a small circle near the Scan name)
you can click “Compare” button at the top of the Scans list column. All selected and
downloaded Scans will be sent for compare. You will see number in a red circle at the
“Compare” button.
Click button and you will be redirected to the screen with the list of
Scans that are going to be compared. To proceed click “Compare” button at the right
top corner and you will be redirected to the special interface for comparing different
types of Scans.
Click “Clear All” button to clear the list of compared Scans.
To Next Page
Loading...
Need help?
General