Epic X User Manual 43
9 Maintenance
9.6 TRANSPORTATION
The Epic X is susceptible to damage if not handled properly. The unit should ALWAYS be handled
carefully and never banged, jarred, jolted, dropped, or knocked.
Do not transport the unit unless it is completely packaged inside its shipping box. If you have any
questions regarding transportation, please call BIOLASE Service at 1-800-321-6717.
9.7 STORAGE
The Epic X should be stored in a cool, dry place when not in use under the following environmental
conditions:
• Storage temperature: 15°C-35°C (59°F-95°F)
• Relative humidity: 10%-90%, non-condensing
Cover the unit when not in use for extended periods of time. Store the system in a place where it will
not be accidentally bumped or banged.
The Epic X is shipped inside a custom shipping box. Please save and store the box in a cool, dry
place for use when transporting the laser, or for long-term storage.
CAUTION: Make sure the distal end of the fiber shaft is protected from dirt by
removing the Handpiece and installing the red protective cap over the end of the fiber.
Remove the batteries from the Footswitch if the Epic X is not likely to be used for some
time.
NOTE: At end-of-life, final disposition of the laser must be done as required by local waste electrical
and electronic equipment (WEEE) laws.
To Next Page
Loading...
