Biolase EPIC X - Epic X Laser System Specifications; General Device Specifications; Electrical System Specifications; Laser Output and Mode Specifications

Epic X User Manual 9
4 Specifications
4.1 GENERAL
• Dimension (W x L x H)
5.7 in x 6.5 in. x 4.4 in (14.5 cm x 11.2 cm x 16.5 cm)
• Weight
2.5 lbs / 1kg
4.2 ELECTRICAL
• Operating voltage
100V - 240V ~ at 1.5A
• Frequency
50 / 60 Hz
• External Fuses
None
• Main control
Main Power Switch (ON/OFF Control Button)
• Remote Interruption
Remote interlock
• Disable Control
Emergency Stop Button
• Battery
Lithium Ion Rechargeable, 14.6V, 2.75Ah
• DC Power Supply Module
12V DC, 5A
4.3 LASER
• Laser Classification
IV (4)
• Medium
InGaAs Semi-conductor diode
• Wavelength
940 ± 10nm
• Max Power Output
10W
• Power Accuracy
± 20%
• Power Modes
Continuous, Pulse Modulation
• Fiber Tips Diameter
200µm, 300µm, 400µm
• Pulse Duration
0.01ms – 20ms
• Pulse Interval
0.04ms – 20ms
• Pulse Repetition Rate
Up to 20kHz (for reference)
• Spot Size
> Surgical Handpiece
400µm (maximum in contact mode)
> Deep Tissue Handpiece
30mm diameter = 7.1cm2 area
> Whitening Handpiece
35mm x 8mm = 2.8cm2
• NOHD (Nominal Ocular Hazard Distance)
2.71 meters
• MPE (Maximum Permissible Exposure)
30W/m2
• Beam Divergence
7- 25.4° per side angle
• Standard Fiber Cable Length
79 inches (2 meters)
4.4 OTHER LIGHT SOURCES
• Aiming Beam
Laser diode, max 5 mW, 625nm – 670nm, Class 2