BioLogic BIODOM 27A - Description and Operation of Boiler Control; Settings for Heating Boiler

10. DESCRIPTION AND OPERATION OF BOILER CONTROL
The Biodom 27A pellet boiler is equipped with Advanced IQ2 control, which enables the reg-
ulation of the pellet boiler, three mixing circuits, DHW domestic hot water, buffer tank, solar
collectors, heat pump, additional heating source.
The home screen displays information about the entire system.
For general control settings, see the separate instructions for "Advanced IQ2 control", where
you set the WiFi settings and language.
Heating boiler
Airflow
6 l/s
HC1-ground floor
Desired T. Flow
36 °C
Buffer tank
Desired temp.
76 °C
HC2 - floor
Desired T. Flow
39 °C
Solar collectors
T. collectors.
98 °C
HC3 - floor
Desired T. Flow
31 °C
DHW
T. DHW tank
53 °C
Heat Pump
Fan speed
520
10.1. SETTINGS FOR HEATING BOILER
By clicking on the rst "Boiler" button, you open the boiler menu, which shows:
Heating boiler
Boiler temp.
Flow pipe T. Buffer above Feeder
Operation
The boiler is off
www.biodom27.si
BIODOM 27A 29