EasyManua.ls Logo

BioLogic BIODOM 27A - Page 32

BioLogic BIODOM 27A
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Boiler water temperature
The rst window at the top left shows the current
water temperature in the boiler
Clicking on the white rectangle opens a new win-
dow, where you turn the knob to set the desired
boiler water temperature.
The recommended temperature is 65°C - 85°C
(with a higher temperature we protect the boiler from condensation and thus extend its service life)
Switching on the boiler
Switch on the boiler by pressing the button on
the top right:
On - green button
Off - white button
Current status of the boiler
The current state of the pellet boiler is dis-
played in the middle above
1. The boiler is switched off
2. The boiler works according to the time
program
and waiting to turn on
On
Pre-ignition test:
The system rst checks if everything is ready
to start burning
Fast loading of pellets:
First loading of pellets to ignite the ame
Operation
Operation
Ignition test
Fast loading
Boiler off Time program
Boiler temp.
www.biodom27.si
30 BIODOM 27A