▣ Auto Zeroing
This is a function for initiating automatic adjustment of the zero point when a TOCO value is
maintained below 0 for at least five seconds.
▣ Fetal Movement
This is used to set up whether to output fetal movement-related graphs to the screen or through the
printer.
If the value is “FMD+FM” or “FMD”, the title of TOCO will be displayed as “TOCO+FM” (if Off, “TOCO”).
Fetal Movements are displayed as Fetal Movement graphs, and automatically detected Fetal
Movements, as FMDs in the form of points.
<LCD Display>
<Paper Display>
▣ TOCO Color
This is used to set up TOCO values and Trace line colors.
To Next Page
Loading...
