Chapter 18. Simple troubleshooting
1) Troubleshooting and solutions
① If the probe comes off during operation, a “---” sign will be displayed, and a “Ding” sound will be
heard. In this case, check the connection condition of the probe and connect the probe again to
solve the problem.
② If paper has run out during operation, a “Paper off” sign will be displayed on the LCD screen. In
this case, please open the printer, check if the recording sheets have run out, replenish the record
sheets, and close the printer to solve the problem.
If Touch Calibration is not properly set, the system may not operate properly. You must
calibrate the touch input as written in the operation manual..
2) Performing periodic inspections
Just like all kinds of medical equipment, please conduct safety inspections on FC1400 periodically
(once a year). Refer to the service manual provided by the company for the inspection items.
To Next Page
Loading...
