8) Preset
It is a function which standard settings can be only changed by authorized person. Volume adjusting
function applies to current patient, and when device is restarted or moved to another patient, it turns
on to preset function value. But, if the device is turned off abnormally and turned on within 30sec, it
recognizes as same patient and maintains previous setting value.
Preset function consists of alarm volume, alarm function usage, alarm range, alarm level, alarm delay
time, US1 Volume, US2 Volume.
To proceed alarm preset function, touch Main Menu->Preset.
As an authorized person only can set the function, enter the password in order to move to setting
menu.
The initial Preset Password in Factory mode is “1234”. Change Preset Password after
installation to avoid use by unauthorized person. To change the Preset Password, touch
Main Menu->System->Change PW and enter password. Please be aware, when the
changed password is lost by users, the only way to use the device is initializing to factory
mode. When initialized, all data will be removed. Please keep the password in safe place.
To Next Page
Loading...
