Biosite Triage Meter Pro - Meter Configuration Settings

Rev AN-4
For reference, record your settings in the space provided.
For more details about
Meter Settings see
page N-11.
5. To Change Meter Settings:
a. Select SET PARAMETERS using the keys and Press the key.
b. Select
METER SETTINGS using the keys and Press the key.
c. Select ID SETTINGS, DISPLAY SETTINGS or COMM SETTINGS using
the keys and Press the key.
d. Select the desired setting using the keys and change the value of the
setting by using the keys.
ID SETTINGS Default Options New Setting
CH
ARACTERS
US
ER
ID Min 1 1 - 10
Max 10 1 - 10
CH
ARACTERS
PA
T
. ID Min 1 1 - 12
Max 12 1 - 12
CH
ARACTERS
AU
X
ID Min 1 1 - 12
Max 12 1 - 12
AUX. ID ENABLE/DISABLE Disabled Disabled, Enabled
e. Press the key to save changes to ID Settings.