Rev AN-20
CL
OCK
T
he clock menu sets the time and date of the meter and the format for displaying both. If
t
he meter has lost power, the time and date will blink on the Main Menu.
1. From the list of programmable parameters, choose CL
OCK
using keys.
2. Press the key.
3. Use the keys to select
the HO
UR
: MI
NUTE
area. Using the keypad, type
in the correct time. The numbers you type will appear from the right and move left
a
s you continue to type. To change a single number use keys to move to
the number. Then type in the new number.
4. Press the key to move to
AM or PM. If the 24 HR., format has been
previously selected, the AM or PM will not be visable and the TI
ME
FO
RMAT
will be
highlighted. Procede to step 7 below.
5. Select
AM or PM using the keys.
6. Press the key to move to TIME FORMAT.
7. Use the keys to select AM/PM or 24 HR. If selecting 24 HR.,
the previously entered HOUR : MINUTE will change to a 24-hour format and
the AM or PM will disappear.
8. Press the key to move to the DATE.
9. Using the keypad, type in the 6-digit date according to the DATE FORMAT below it.
10. Press the key to move to the DATE FORMAT.
11. Use the keys to select MM-DD-YY, DD-MM-YY or YY-MM-DD.
The pr
eviously enter
ed
DA
TE
changes as the DA
TE
FORMA
T
changes.
12. Press the key to save changes.
MAIN MENU
SET PARAMETERS
CLOCK
Note: If you
have selected
AM/PM, AM or PM
appears after the
time, as appropriate.
To Next Page
Loading...
