Biosite Triage Meter Pro - Page 29

N-19Rev A
L
IS E
N
ABLE
1
. From a list of programmable parameters, choose
ME
TER
SE
TTINGS
u
sing keys.
2. Press the key.
3. Use the keys to select CO
MM
SE
TTINGS
4. Press the key.
5. Use the keys to select LIS.
6.
Use the keys to choose DI
SABLED
or EN
ABLED
.
7. Press the key.
8. If
DI
SABLED
was selected, a screen showing LIS DI
SABLED
will appear. Press
the key.
9. If
ENABLED was selected, a screen showing ENTER LIS PASSWORD will appear.
Enter the password provided by Biosite Technical Services. Press the key.
10. Acknowledge the LIS ENABLED message by pressing the key.
AUTO UPLOAD (This feature is visible after the LIS has been enabled.)
1. From a list of programmable parameters, choose METER SETTINGS
using keys.
2. Press the key.
3.
Use the keys to select
COMM SETTINGS.
4. Press the key.
5. Use the keys to select AUTO UPLOAD.
6. Use the keys to choose ENABLED or DISABLED.
7. Press the key.
MAIN MENU
SET PARAMETERS
METER SETTINGS
COMM SETTINGS