Biosite Triage Meter Pro - Meter Operation

O-1Rev A
Access to The Triage MeterPro
Function Use Restricted to
RU
N
TE
ST
Patient Testing operators with valid User ID numbers*
Quality Control Testing operators with valid User ID numbers*
RECALL RESULTS Patient Testing
Quality Control Testing
INSTALL CODE CHIPS Types of Code Chips
Installation Procedure
SE
T
PA
RAMETERS
Access Control Supervisor
Programmable Settings Supervisor
DE
LETE
RE
SULTS
Patient Test Results Supervisor
* Unless User ID is bypassed or the Supervisor Code Chip module is installed.
IMPORTANT: The last two functions, SET PARAMETERS, and DELETE RESULTS,
appear on the main menu only when the Supervisor Code Chip module is inserted
into the Code Chip module Port. The Supervisor Code Chip module should be
removed from the meter during routine patient and quality control testing.
Operation
Note: Access
to various
parts of the software
is user (institution)
defined