Biosite Triage Meter Pro - Meter Settings

Rev AN-12
5. Use the keys to select the number to the right of CHARACTERS USER ID
under the MIN column.
6
.
U
se the keys to
c
hoose the smallest number of characters that will
a
ppear in the User ID number. The minimum number of characters possible is
1.
7. Use the key to select the number to the right of CHARACTERS USER ID under
the MAX column.
8. Use the keys to choose the largest number of characters that will appear
in the User ID number. The maximum number of characters possible is 10.
9. Press the key to save changes.
CHARACTERS PAT. ID
This setting will set the minimum and maximum number of characters in the Patient ID.
1. From a list of programmable parameters, choose INSTRUMENT SETTINGS
using keys.
2. Press the key.
3. Use the keys to select ID SETTINGS.
4. Press the key.
5. Use the keys to select the number to the right of CHARACTERS PAT. ID
under the MIN column.
6. Use the keys to choose the smallest number of characters that will
appear in the Patient ID number. The minimum number of characters possible is 1.
7. Use the
key to select the number to the right of
CHARACTERS PA
T
. ID under the
MAX column.
8. Use the keys to choose the largest number of characters that will appear
in the Patient ID number. The maximum number of characters possible is
12.
9.
Press the
key to save changes.
MAIN MENU
SET PARAMETERS
METER SETTINGS
ID SETTINGS