N-25Rev A
TE
ST
SE
TTINGS
I
n certain cases, the lab supervisor may wish to control which tests are available to be run
a
t the time of patient testing. The options are:
1
. The test is always run and cannot be deselected.
2. The test is never run and is not displayed.
3. The test can be selected by the user at the time of running the test.
4. The test can be deselected by the user at the time of running the test.
If these options are not available for a test, the meter skips over the setting as the
supervisor scrolls through the options. See pages N-26 and 0-8 for more details.
TE
ST
MO
DE
It also may be appropriate for some test panels to display certain analytes Qualitatively
and others Quantitatively. Presently, Biosite does not have any test that fits this category.
This feature is reserved for future use.
MAIN MENU
SET PARAMETERS
To Next Page
Loading...
