Biosite Triage Meter Pro - Page 52

Rev AO-12
TE
ST
DE
VICE
LO
T
NU
MBER
(
L/N)
T
o retrieve results based on the lot number of the test devices used:
1. Press the key to power The Triage MeterPro on.
2. From the
MAIN MENU select RECALL RESULTS using the keys.
3. Press the key.
4. Select PATIENT RESULTS using keys.
5. Press the key.
6. Select
DEVICE L/N using keys.
7. To display all results, press the key.
8. To display results specific to one lot, type in the lot number of the test device.
To correct, press the key to clear the entire number, or select the incorrect
digit by using the keys. Then type in the cor
r
ect number.
9.
Pr
ess the key.
10. All results from test run on the requested lot number are displayed.
11. Press the key to make a printed copy.
The lot number of the test device is found on
the device and on the outer box
MAIN MENU
RECALL RESULTS
PATIENT RESULTS
Note: Only enter
the five digit
numeric value of the
QC lot number