BP-007 User’s Manual
- 23 -
5) A window of “Add Standard TCP/IP Printer Port Wizard” pops up, click “Next”.
6) A window of “Add a port” pops up, import the IP address reported by the “Setting printer’s IP
address” in the “Printer name or IP address” column. Take IP address “192.168.0.240” for
example. “Port name” is created automatically after finishing filling in IP address. Click “Next”.
7) A window of “Additional Port Information Required” pops up, select “Custom” in the “Device Type”,
then click “settings”.
To Next Page
Loading...
