BP-007 User’s Manual
- 32 -
Chapter 5 Specifications
5.1 Basic Specifications
Item Description
Printing method 9 Pins Dot matrix impact
Printing direction Bidirectional logic seeking
Diameter of wire 0.3mm
Dot density 160×144DPI (maximum)
Standard Auto-cutter
Cuttable thickness:0.065 ~ 0.075mm
Print speed: 4.7lines per second (paper width 76mm, 40 columns);
Copy 3 pieces (Original + 2 copies)
MCBF: 12 million lines Reliability
Print Head Life: 400 million dots/wire (200 million characters)
Effective printing width 63mm
Paper feed speed 140mm/s (Max.)
Paper Specifications
Paper Width: 57.5 ±0.5 mm, 76 ±0.5 mm
Paper Weight: 52.3~64.0 g/m
2
Paper Thickness: 0.06~0.20mm
Diameter of paper: Φ83mm max.
Inner Diameter of paper shaft: Φ12mm min.
Outer Diameter of paper shaft: Φ18mm max.
ASCII character set, International character set Character set
Big 5 or GB 18030
Line spacing 1/6 inch, or by programmable in 1/144 inch increments
Type: Compatible star RC 200B Ribbon
Life: 3 million characters
Interface types
Cash drawer interface + data interface (parallel interface, USB interface,
serial interface, USB interface + Ethernet interface, Bluetooth or USB
interface & Wi-Fi)
Cash drawer interface: RJ-11, DC24V/1A
Parallel interface: Centronics
Serial interface: RS-232C (DB25)
USB interface: 2.0 Full-speed
USB interface + Ethernet interface: 2.0 Full-Speed, 10/100Base-T
Bluetooth: 2.0/2.1 + EDR
USB interface + Wi-Fi: 2.0 Full-Speed , 802.11b/g/n
Note: Only one of the data interfaces is supplied when leaving the
factory. (According to the specific interface standards.)
Black mark Standard
Special function Online parameter settings, Software online upgrade
Buffer memory 60KB
ESC/POS Emulation Control command
Character printing command: Support ANK characters, user-define
characters and enlarge Chinese characters 1-2 times printing, can adjust
To Next Page
Loading...
