Birch BP007 - Printer Setting Descriptions

BP-007 User’s Manual
- 27 -
3.2.2 Printer Setting Descriptions
PARAMETER ITEMS DESCRIPTION REMARK
BLACK MARK ON; OFF After selecting this function on, printer would
carry out black mark detect instruction so that
to make the vertical positioning printing
precisely. (Bills or papers should have black
mark on the surface.)
PRINT MODE BI-DIR; Select the printing direction of the print head:
Figure 3-2 BP-007 Default settings (Parallel and USB interface)
Figure 3-3 BP-007 Default setting (Serial interface)
BP-007 9Pin Mini Printer
VX.XX XXX XXXX-XX-XX
SN: XXXXXXXXXXXXXXXXXXXX
Cutter: OFF
Black Mark: OFF
Print Mode: BI-DIR
Paper Width: 76mm
CODEPAGE:
0:PC437
1:PC850
2:PC860
20:THAI（KU42）
21:THAI（TIS11）
26:THAI（TIS26）
BP-007 9Pin Mini Printer
VX.XX XXX XXXX-XX-XX
SN: XXXXXXXXXXXXXXXXXXXX
Cutter: OFF
Interface: RS-232
Baud Rate: 9600
Parity check: No
Data bit length: 8 bits
Stop bit: 1bit
Handshake: DTR/DSR
Black Mark: OFF
Print Mode: BI-DIR
Paper Width: 76mm
CODEPAGE:
0:PC437
1:PC850
2:PC860
20:THAI（KU42）
21:THAI（TIS11）
26:THAI（TIS26）