CYCLOPS-I BT Scanner Configuration Guide 11
5. Bluetooth Connection
5.1. Specifications
CYCLOPS-I is a wireless interface device. It follows Bluetooth ver2.1+EDI Class II
specification, including the SPP( Serial Port Profile ) and HID( Human Interface Device
Profile) on this device, The same profile must be available on the device (ex. iPhone, iPad or
PC ) to be paired for successful Bluetooth connections.
Intensity of the
Radio Power
Class II
Maximum transmission distance is 10-meter. Transmission distance
will differ in various application site conditions.
One CYCLOPS-I can only be paired with one host device. It can’t be
paired with more then one host device at the same time.
SPP ： It is a Serial Port Profile communication for SPP Slave Mode
or SPP Master Mode.
HID： It is Human Interface Device communication.
Authentication &
Encryption
Authentication ：
Default PIN Code is “0000”. It can be changed by scanning
configuration barcodes.
Encryption ：
The data can be encrypted by Bluetooth communication. Default
status is with no encryption. It can be ENABLED / DISABLED
by scanning configuration barcodes.
※ To connect CYCLOPS-I with iPhone and iPad of Apple products, the version of iOS must
be 5.0 or beyond.
※ To connect CYCLOPS-I with Android-OS products like smart phone, the version of
Android OS must be 4.0 or beyond.
※ To connect CYCLOPS-I with BT dongle of PC or laptop, the version of dongle must be
2.0 or beyond.
To Next Page
Loading...