BitaTek Cyclops Series - HID Communication

CYCLOPS-I BT Scanner Configuration Guide 15
No
Function
Host Sends
Host Receives
Notes
3
Read Date &
Time of
CYCLOPS-I
!3<CRLF>
RE3,
YYYYMMDDHHMM
<CRLF>
CYCLOPS-I will return Date &
Time according to this
command to host device.
4
Power status
!4<CRLF>
RE4,F<CRLF>
RE4,M<CRLF>
RE4,L< CRLF>
CYCLOPS-I will return battery
status to host device.
F: battery is Full
M: battery is half-full
L: battery is Low
5
Send the
Scanned Data
File of
CYCLOPS-I
!5<CRLF>
None
CYCLOPS-I will send all
records of the <data.txt> in the
memory to host device.
6
Delete the
Scanned Data
File of
CYCLOPS-I
!6<CRLF>
RE6,OK<CRLF>
RE6,NG<CRLF>
CYCLOPS-I will delete the
<data.txt> file in the memory
7
Communication
“Wait” status
!7<CRLF>
RE7,OK<CRLF>
RE7,NG<CRLF>
CYCLOPS-I will wait for the
next coming host command.
Scanning function of
CYCLOPS-I, during this
waiting period, will not work.
8
Recode Count
of Data File
!8<CRLF>
RE8, XXXX<CRLF>
CYCLOPS-I will return the
Record Count of <data.txt>
to host device.
5.4. HID Communication
CYCLOPS-I is pairing with iPhone, iPad ( Apple products ), or Android smart devices
( various smart phones ) via HID Communication Mode. CYCLOPS-I will be regarded as
keyboard data entry device of these host devices. HID Mode is the default mode of
CYCLOPS-I. Apple products or Android smart devices can be easily paired and connected
with CYCLOPS-I without further configuration settings. As to how to connect with these host
devices, please refer to the Bluetooth Menu of those host devices.