BitaTek Cyclops Series - System Configuration Barcodes; System Mode Settings

CYCLOPS-I BT Scanner Configuration Guide 30
Item
Default
I2 of 5 convert to EAN13
Disable
Discrete 2 of 5
Disable
Chinese 2 of 5
Disable
Matrix 2 of 5
Disable
Matrix 2 of 5 Redundancy
Disable
Matrix 2 of 5 check-digit verify
Disable
Matrix 2 of 5 check-digit transfer
Disable
Codabar(NW7)
Enable
CLSI
Disable
NOTIS
Disable
MSI
Disable
MSI check-digit
One
MSI check-digit transfer
Disable
MSI check-digit algorithm
MOD 10 /mod 10
GS1 Databar omni-directional
Enable
GS1 DataBar Limited
Enable
GS1 DataBar Expanded
Enable
GS1 DataBar
Disable
9.2. System Configuration Barcodes
CYCLOPS-I was configured and shipped with all functions and parameters following Factory
Default values. Please refer to <9.1 Factory Default Settings> for all details. , To change
related settings, the configuration barcodes provided hereinafter are for you to further tailor
CYCLOPS-I fit in your applications better.
9.2.1. System Mode Settings
The Setting barcode of action mode and Bluetooth communication as follow..