BitaTek Cyclops Series - Real-Time Mode Settings under SPP Mode; Real-Time Mode Settings under SPP Master Mode

CYCLOPS-I BT Scanner Configuration Guide 24
8.3. Real-Time Mode Setting Under SPP Mode
If fault-proof of Bluetooth data transmission is among all critical requirements, Real-Time
Mode under SPP Mode should be chosen for this task.
Real-Time Mode under SPP Mode is a virtual serial port data communication between
CYCLOPS-I and host device. Related communication protocols can be configured to prevent
data error ( been lost or altered ).
A dedicated application utility installed on the host device (like Android smart phone, PC,
--etc ) will be needed. Please refer to <5. Bluetooth Connection>.
8.3.1. Real-Time Mode Setting Under SPP Master
Mode
Function
Parameter
Setting Barcode
Code
ID
Enter
physical
Address of
BT
Module
Input
B001A
Commu.
Start
Enter SPP
Master
Mode
A001B
Operat.
Mode
Setting
Real-Time
Mode
A014A1
please refer to <Setting Barcodes About Bluetooth Device Name of CYCLOPS-I> of
<9.2.1 System Mode Setting>.