BitaTek Cyclops Series - USB Data Transfer Mode

CYCLOPS-I BT Scanner Configuration Guide 18
6.2. USB Data Transfer Mode
Under Batch Mode, the scanned data will be saved into the <data.txt> file of CYCLOPS-I
memory. These scanned data can be retrieved via the optional CYCLOPS-I USB cable.
Items
Description
Transfer
Connected with PC:
When CYCLOPS-I is connected with host device via USB cable,
CYCLOPS-I memory will be regarded as a USB disk ( Mass Storage
Device )..
※Please use the optional USB cable provided by Bitatek or Bitatek
authorized distributor/reseller.
USB Memory
Function
Under Batch Mode, maximum records of <data.txt> are 8000 records
which includes two files in the memory of CYCLOPS-I:
1. Data.txt: Under Batch Mode, the scanned data will be saved into
this file. If connecting CYCLOPS-I using USB cable
with host device, this file can be read or deleted.
2. System.cfg: This is the configuration file of CYCLOPS-I. When
this file been modified or changed then reloaded into
CYCLOPS-I, after rebooting, CYCLOPS-I’s behavior
will be changed accordingly.
Notes
Under USB Data Transfer Mode, the following functions will be
limited:
 Bluetooth communication will be disabled;
 Barcode scanning and other operations will be disabled.