BitaTek Cyclops Series - Real-Time Mode Settings under Spp Slave Mode; Hybrid Mode Settings under SPP Mode; Hybrid Mode Settings under SPP Master Mode

CYCLOPS-I BT Scanner Configuration Guide 25
8.3.2. Real-Time Mode Setting Under SPP Slave Mode
Function
Parameter
Setting Barcode
Code ID
Commu.
Setting
SPP Slave
Mode
A002A
Operat.
Mode
Setting
Real-Time
Mode
A014A1
8.4. Hybrid Mode Setting Under SPP Mode
Due to out of range or other reasons, Bluetooth might be disconnected sometimes while
CYCLOPS-I is in use. In order to avoid data loss, CYCLOPS-I system will save the scanned
data into the data file of memory of CYCLOPS-I in Hybrid Mode. After the Bluetooth been
reconnected, CYCLOPS-I system will transmit the stored data back to host device in a “ First
In, First Out “ (FIFO) manner.
An application utility needs to be installed and running on the host device (like Android smart
phone, PC) . Please refer to <5. Bluetooth Connection>.
8.4.1. Hybrid Mode Setting Under SPP Master Mode
Function
Parameter
Setting Barcode
Code ID
Enter the
Physical
Address of
BT
Module
Input
B001A