BitaTek Cyclops Series - Page 39

CYCLOPS-I BT Scanner Configuration Guide 39
You can utilize the following barcodes to add “ Additional Termination-Characters” to the
scanned data, including Combination Keys ( such as “Shift”, “Alt”, “Ctrl” ).
Alpha-Numeric character setting must be entered in 2-digit word ( Hex format ) and the word
can only be 0~9, A ~ F. For example, to set “#” as the termination character, you have to scan
the barcode ID”B019B” first, then,“2”,”0”,”EOC”.
Please use barcodes listed in <9.2.6 Setting Barcodes of Alpha-Numeric Entries > to enter
additional characters.
HID Termination Character Setting
Function
Parameter
Setting Barcode
Code ID
Normal Key
Setting
Input
B021A
Additional
Characters
+”Shift” Key
Setting
Input
B021B
Additional
characters
+”Alt” Key
Setting
Input
B021C
Additional
Characters
+”Ctrl” Key
Setting
Input
B021D
You can utilize the following barcode to transfer Function Key codes, including Combination
Keys ( such as “Shift”, “Alt”, “Ctrl” ).
Alpha-Numeric character setting must be entered in 2-digit word ( Hex format ) and the word
can only be 0~9, A ~ F. For example, to set “#” as the termination character, you have to scan
the barcode ID”B019B” first, then,“2”,”0”,”EOC”.
Please use barcodes of <9.2.6 Setting Barcodes of Alpha-Numeric Entries> to enter key
codes accordingly.