BK Precision 5492 - Page 3

3
1-3 Options and Accessories
At the moment, one option is available for 5492 only, which option can be
installed at the factory and a field installable retrofit kit option is also available:
! IEEE-488 interface (Option GP5492) provides full programmability. There
are two types of programming commands: IEEE 488.2 Common Commands
and Standard Commands for Programmable Instruments (SCPI). The SCPI
commands used in this device is conformance with the SCPI Standard
Version 1993.0.
Standard accessories come with the meter are:
! Power cord
! Protective holsters (Front and Rear)
! Operation Manual
! TL 36* Test leads
! AC 01 Cap for TL 36
* Maximum Measurement Ratings: 1kVdc, 10A dc or ac rms continuous,
and 12A dc or ac rms for 30 seconds maximum.
Available optional accessories are listed as below:
! TL 35* Test leads
! TH 02 Insulation piercing clip
! AC 02 Lantern tip extension probe for TL 35
! AC 03 Alligator clip
! KC 01 4wire test cable set with Kelvin clippers
! AK 5491 RS-232 PC Link software
! GP5492 IEEE-488 GPIB Interface Upgrade (Only for 5492)
! RK 01 Rack-mount kit (used for single meter)
*
Maximum Measurement Ratings: 1kVdc, 10A dc or ac rms continuous,
and 12A dc or ac rms for 30 seconds maximum.