BK Precision 8500 Series User Manual

40
10A
5A
TRG
TRG
Toggled Transient Operation
Action
1. Press
Shift
and
S-Tran
, Setting LEVER A=5A, LEVER B=10A, Transition
mode is PULSE .
2. Press
Shift
and
Tran
to activate the transient mode.
3. Press
Shift
and
Trigger
switch to the current value of 10A.
4. Press
Shift
and
Trigger
, switch between 5A and 10A.
5. Press
Shift
and
Tran
again to stop the transient operation.
List Operation
Users can use the front panel keypad or Power View 8500(PV-8500) software to
programming the list sequence. Please refer to the software user’s guide.
The following example will help you how to do the list operation in front panel.
Trigger
10 2 3 4 5
List count=1 List count=2
List sequence
Action
1) Press the button of
Input on/off
, execute the input of Load I in OFF state.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
FAX 781.665.0780 - TestEquipmentDepot.com

BK Precision 8500 Series Specifications

General

Series	8500
Voltage Range	0-120V
Display	LCD
Interface	USB, RS232, GPIB (optional)
Modes	CC, CV, CR
Category	Electronic Load