_____________________________________________________________________
724-746-5500 | blackbox.com Page 64
Specify the Probe Addresses of two sites (the Primary and Secondary) that the console server is to
ping to determine if Network1 is still operating.
Select the System: Dial menu option and the port to be configured (Serial DB9 Port or Internal
Modem Port).
Select the Baud Rate and Flow Control that will communicate with the modem.
Note You can further configure the console/modem port (for example, to include modem init strings) by
editing /etc/mgetty.config files as described in Chapter 13.
Check the Enable Dial-Out box in System: Dial and enter the access details to call the
remote PPP server.
To Next Page
Loading...
