Blaupunkt BLUEBOT XSMART - Placing the Batteries in the Remote Control; Setting the Time

59
EN
5.7 Placing the batteries in the remote control
Remove the lid and insert the batteries into the remote control
(seeFigure17). Place the lid back on the battery compartment.
Figure 17 - Placing the batteries in the remote control
5.8 Setting the time
Set the time with the remote control as follows:
1. Press the CLK button on the remote control and hold for 3 seconds.
Onthe remote display the hour numbers will ash.
2. Press the Up or Down direction buttons to set the hour.
3. Press the Right direction button to conrm.
The minute numbers will now ash.
4. Press the Up or Down direction buttons to set the minutes.
5. Press the Right direction button to conrm.
The set day will ash.
6. Press the Left or Right direction buttons to set the day.
7. Press the CLK button to conrm.
NOTICE
The remote’s Current Clock Time function is solely to display the time and
does not reect or interfere with the scheduled time for cleaning.
1
2