Blaupunkt BLUEBOT XSMART - Cleaning the Normal Suction Nozzle; Cleaning the Brush Suction Nozzle

73
EN
8.7 Cleaning the normal suction nozzle
To clean the normal suction nozzle, do the following:
1. Make sure the power switch is o and the robot is not in Stand-by or in
Sleep mode.
2. Rinse the suction nozzle with water.
8.8 Cleaning the brush suction nozzle
To clean the brush suction nozzle, do the following:
1. Make sure the power switch is o and the robot is not in Stand-by or in
Sleep mode.
2. Take out and disassemble the roller brush kit and clean it with a soft
cleaning cloth or tool. The roller brush axle can be washed with water.