63
EN
Intensive
Cleaning
mode
N/A Press four times
on MODE on
the remote
control. Choose
Mode- 4.
Tap on
OPERATION.
Select
INTENSIVE.
EN: Alexa, ask Bluebot
to start intensive
cleaning
DE: Alexa, starte
Intensiv-Reinigung mit
Bluebot
* Depending on the robot’s status
** Only works when the robot is in Standby
Table 11 - Activating the cleaning modes explained for dierent control types
6.4 Sending robot to the charging station
When the robot is nished with the cleaning cycle, it will automatically
return to the charging station. The robot will also return to the charging
station when the battery is low.
Table 12 shows the commands per control type for sending the robot to
the charging station.
Press HOME Press HOME Tap on "Re-charge" in
the Operation screen
EN: "Alexa, ask Bluebot to
start charging"
DE: "Alexa, lade den Bluebot
auf"
Table 12 - Sending robot to the charging station
When the robot has returned to the charging station, you can turn your
robot o or put the robot in Standby mode or to sleep. After 60 seconds
the robot automatically enters sleep mode.
•
Standby means the robot has its power switched on and is waiting for
the user’s operation.
•
Sleep means power-saving mode.
When the robot has returned to the charging station and the charging
station is connected to the mains supply, charging will start. For more
information about charging, see section 5.6.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
